P.O. Box 17062 CLEARWATER, FL 33762
PH. 1-727-789-5786 FAX 1-727-572-9926
www.floridawaterblast.net
Mounted in a wastewater recovery tank
A really portable Tote-It
|
Temperature of Liquid
|
pH 1-5 (acidic)
|
pH 6-8 (neutral)
|
pH 9-14 (alkaline)
|
|
33°F-180°(0.5°C- 82°C)
|
CRV
|
nitrile
|
CRV
|
|
181°F-212°F(83° C-100°C)
|
CRV
|
CRV
|
CRV
|
|
Temperature of Liquid
|
pH 1-5 (acidic)
|
pH 6-8 (neutral)
|
pH 9-14 (alkaline)
|
|
33°F-180° (0.5°C- 82°C)
|
CR steel, Polymer
|
Polymer
|
Polymer
|
|
181°F-212°F (83° C-100°C)
|
CR steel
|
CR steel
|
CR steel
|
The Tote - It's patented design is a
dependable and effective means
of removing oil from water. The
single assembly unit can be used
in any application where 115 VAC,
60 Hz power is available.
The Tote-It utilizes a continuous belt
and wiper to remove up to 12 gal-
lons of oil per hour.from the fluid sur-
face. The belt operates on a motor
and pulley system attached to a sta-
bilizer bar that is immersed in the
contaminated liquid. After traveling
over the head pulley, the belt pas-
ses through tandem wiper blades
where oil is scraped off both sides
of the belt, and discharged through
a 1 - 1/4 in. ID hose. The tail pulley
has flanges which allow it to roll
freely on the inside of the belt with-
out becoming dislodged. It does not
need to be fastened to the tank. Oil
skimming makes use of the differen-
ces in specific gravity and surface
tension between oil and water. These physical characteristics allow the belt to attract oil and other hy-
drocarbon liquids from the surface of the fluid.
The Tote-It is especially well suited for parts washing and machining center applications. By removing
surface oil from a wash tank, the parts will not be recontaminated as they are withdrawn. Removing
tramp oil from a coolant tank prevents excessive smoke and fumes due to oil burning during cutting op-
erations. It also reduces bacteria growth in the tank, along with the resulting odor.
Specifications
Oil Removal Rate:
12gph (45.6 lph) with 4 in.( 10 cm) wide belt
6 gph (22.8 lph) with 2 in.( 5 cm) wide belt
3 gph (11.4 lph) with 1 in.(2.5 cm) wide belt
(Removal rate is based on 30 weight oil in water.)
Motor: Fractional hp gear motor, 115VAC, 60 Hz
Belt Width: Specify 4 in. (10 cm), 2 in. (5 cm), or 1 in. (2.5 cm)
Belt Length: User specified (up to 10')
Belt Material: Specifically selected for your application (see Belt Selection page)
Wiper: Nitrile standard; CRV rubber, UHC rubber and Ceramic optional. Specify
wiper material based on temperature and fluid compatibility.
Mounting Method: Flat base mount with oil discharge through a 1-1/4 in. I.D. hose. See instal-
lation drawing.
Mounting Area: See installation drawing.
Weights: Complete assembly with stabilizer bar, tail pulley, and steel belt:
1 in. :average 30 lbs. (13.6 kg)
2 in. : average 34 lbs. (15.4 kg)
4 in. : average 36 lbs. (16.3 kg)
( Note: optional hose w/clamp and adapter weighs 2 lbs. (0.9 kg).

FLORIDA WATER BLAST, INC. Clearwater Florida Ph. 1-727-789-5786























oil skimmers, oil skimmer, grease skimmer, belt oil skimmer, coolant odor, groundwater sump, skimmer, belt oil
skimmers, groundwater remediation, oil water separator, oilskimmers, skimmers, wastewater, oil skimmer,
well product skimmers, 18" disc oil skimmers, 2" belt skimmers(no. 6 fuel oil), abanaki oil skimmer, belt skimmer
4 inch monitoring wells, best uses for oil skimmers, LNAPL recovery, DNAPL recovery, oil removal, tramp oil,
waste oil, skimmer pump, oil grabber, mighty mini, pollution control, Abanaki, oil water separator, belt skimmer,
oil skimming, belt skimmers, coolant smell, remediation equipment, wastewater, oil removal, air vacuum,
vacuum, sump cleaning, industrial vacuum, vacuum, coolant removal, wet vacuum, wet vac, pneumatic
vacuum, pneumatic drum vacuum, coolant maintenance, q-vac, qvac, Q-vac, Qvac100, q-vac 100, shop
vacuum, liquid vacuum, oil vacuum, coolant vacuum, Metalworking fluid, metalworking shops, coolant,
lubricant, cutting fluid, skimmer, maintenance, products, equipment, oil skimmers, oil removal, sump,
coalescers, Zebra Skimmers, abanaki, florida water blast, inc.
